utmp
UTMP(5) Linux Programmer’s Manual UTMP(5)
NAME
utmp, wtmp - login records
SYNOPSIS
#include <utmp.h>
DESCRIPTION
The utmp file allows one to discover information about who is cur-
rently using the system. There may be more users currently using the
system, because not all programs use utmp logging.
Warning: utmp must not be writable, because many system programs
(foolishly) depend on its integrity. You risk faked system logfiles
and modifications of system files if you leave utmp writable to any
user.
The file is a sequence of entries with the following structure
declared in the include file (note that this is only one of several
definitions around; details depend on the version of libc):
#define UT_UNKNOWN 0
#define RUN_LVL 1
#define BOOT_TIME 2
#define NEW_TIME 3
#define OLD_TIME 4
#define INIT_PROCESS 5
#define LOGIN_PROCESS 6
#define USER_PROCESS 7
#define DEAD_PROCESS 8
#define ACCOUNTING 9
#define UT_LINESIZE 12
#define UT_NAMESIZE 32
#define UT_HOSTSIZE 256
struct exit_status {
short int e_termination; /* process termination status. */
short int e_exit; /* process exit status. */
};
struct utmp {
short ut_type; /* type of login */
pid_t ut_pid; /* pid of login process */
char ut_line[UT_LINESIZE]; /* device name of tty - "/dev/" */
char ut_id[4]; /* init id or abbrev. ttyname */
char ut_user[UT_NAMESIZE]; /* user name */
char ut_host[UT_HOSTSIZE]; /* hostname for remote login */
struct exit_status ut_exit; /* The exit status of a process
marked as DEAD_PROCESS. */
long ut_session; /* session ID, used for windowing*/
struct timeval ut_tv; /* time entry was made. */
int32_t ut_addr_v6[4]; /* IP address of remote host. */
char __unused[20]; /* Reserved for future use. */
};
/* Backwards compatibility hacks. */
#define ut_name ut_user
#ifndef _NO_UT_TIME
#define ut_time ut_tv.tv_sec
#endif
#define ut_xtime ut_tv.tv_sec
#define ut_addr ut_addr_v6[0]
This structure gives the name of the special file associated with the
user’s terminal, the user’s login name, and the time of login in the
form of time(2). String fields are terminated by ’\0’ if they are
shorter than the size of the field.
The first entries ever created result from init(8) processing init-
tab(5). Before an entry is processed, though, init(8) cleans up utmp
by setting ut_type to DEAD_PROCESS, clearing ut_user, ut_host, and
ut_time with null bytes for each record which ut_type is not DEAD_PRO-
CESS or RUN_LVL and where no process with PID ut_pid exists. If no
empty record with the needed ut_id can be found, init creates a new
one. It sets ut_id from the inittab, ut_pid and ut_time to the cur-
rent values, and ut_type to INIT_PROCESS.
getty(8) locates the entry by the pid, changes ut_type to LOGIN_PRO-
CESS, changes ut_time, sets ut_line, and waits for connection to be
established. login(8), after a user has been authenticated, changes
ut_type to USER_PROCESS, changes ut_time, and sets ut_host and
ut_addr. Depending on getty(8) and login(8), records may be located
by ut_line instead of the preferable ut_pid.
When init(8) finds that a process has exited, it locates its utmp
entry by ut_pid, sets ut_type to DEAD_PROCESS, and clears ut_user,
ut_host and ut_time with null bytes.
xterm(1) and other terminal emulators directly create a USER_PROCESS
record and generate the ut_id by using the last two letters of
/dev/ttyp%c or by using p%d for /dev/pts/%d. If they find a DEAD_PRO-
CESS for this id, they recycle it, otherwise they create a new entry.
If they can, they will mark it as DEAD_PROCESS on exiting and it is
advised that they null ut_line, ut_time, ut_user, and ut_host as well.
xdm(8) should not create a utmp record, because there is no assigned
terminal. Letting it create one will result in errors, such as ’fin-
ger: cannot stat /dev/machine.dom’. It should create wtmp entries,
though, just like ftpd(8) does.
telnetd(8) sets up a LOGIN_PROCESS entry and leaves the rest to
login(8) as usual. After the telnet session ends, telnetd(8) cleans
up utmp in the described way.
The wtmp file records all logins and logouts. Its format is exactly
like utmp except that a null user name indicates a logout on the asso-
ciated terminal. Furthermore, the terminal name ~ with user name
shutdown or reboot indicates a system shutdown or reboot and the pair
of terminal names |/} logs the old/new system time when date(1)
changes it. wtmp is maintained by login(1), init(1), and some ver-
sions of getty(1). Neither of these programs creates the file, so if
it is removed, record-keeping is turned off.
FILES
/var/run/utmp
/var/log/wtmp
CONFORMING TO
Linux utmp entries conform neither to v7/BSD nor to SYSV; they are a
mix of the two. v7/BSD has fewer fields; most importantly it lacks
ut_type, which causes native v7/BSD-like programs to display (for
example) dead or login entries. Further, there is no configuration
file which allocates slots to sessions. BSD does so because it lacks
ut_id fields. In Linux (as in SYSV), the ut_id field of a record will
never change once it has been set, which reserves that slot without
needing a configuration file. Clearing ut_id may result in race con-
ditions leading to corrupted utmp entries and and potential security
holes. Clearing the above mentioned fields by filling them with null
bytes is not required by SYSV semantics, but it allows to run many
programs which assume BSD semantics and which do not modify utmp.
Linux uses the BSD conventions for line contents, as documented above.
SYSV only uses the type field to mark them and logs informative mes-
sages such as e.g. "new time" in the line field. UT_UNKNOWN seems to
be a Linux invention. SYSV has no ut_host or ut_addr_v6 fields.
Unlike various other systems, where utmp logging can be disabled by
removing the file, utmp must always exist on Linux. If you want to
disable who(1) then do not make utmp world readable.
Note that the utmp struct from libc5 has changed in libc6. Because of
this, binaries using the old libc5 struct will corrupt /var/run/utmp
and/or /var/log/wtmp. Debian systems include a patched libc5 which
uses the new utmp format. The problem still exists with wtmp since
it’s accessed directly in libc5.
RESTRICTIONS
The file format is machine dependent, so it is recommended that it be
processed only on the machine architecture where it was created.
BUGS
This manpage is based on the libc5 one, things may work differently
now.
SEE ALSO
ac(1), date(1), getutent(3), init(8), last(1), login(1), updwtmp(3),
who(1)
File formats 1997-07-02 UTMP(5)
