syslog.conf

a b c d e f g h i j k l m n o p q r s t u v w x y z _

SYSLOG.CONF(5) Linux System Administration SYSLOG.CONF(5)

NAME
syslog.conf - syslogd(8) configuration file

DESCRIPTION
The syslog.conf file is the main configuration file for the syslogd(8)
which logs system messages on *nix systems. This file specifies rules
for logging. For special features see the sysklogd(8) manpage.

Every rule consists of two fields, a selector field and an action
field. These two fields are separated by one or more spaces or tabs.
The selector field specifies a pattern of facilities and priorities
belonging to the specified action.

Lines starting with a hash mark (‘‘#’’) and empty lines are ignored.

This release of syslogd is able to understand an extended syntax. One
rule can be divided into several lines if the leading line is termi-
nated with an backslash (‘‘\’’).

SELECTORS
The selector field itself again consists of two parts, a facility and
a priority, separated by a period (‘‘.’’). Both parts are case insen-
sitive and can also be specified as decimal numbers, but don’t do
that, you have been warned. Both facilities and priorities are
described in syslog(3). The names mentioned below correspond to the
similar LOG_-values in /usr/include/syslog.h.

The facility is one of the following keywords: auth, authpriv, cron,
daemon, kern, lpr, mail, mark, news, security (same as auth), syslog,
user, uucp and local0 through local7. The keyword security should not
be used anymore and mark is only for internal use and therefore should
not be used in applications. Anyway, you may want to specify and
redirect these messages here. The facility specifies the subsystem
that produced the message, i.e. all mail programs log with the mail
facility (LOG_MAIL) if they log using syslog.

The priority is one of the following keywords, in ascending order:
debug, info, notice, warning, warn (same as warning), err, error (same
as err), crit, alert, emerg, panic (same as emerg). The keywords
error, warn and panic are deprecated and should not be used anymore.
The priority defines the severity of the message

The behavior of the original BSD syslogd is that all messages of the
specified priority and higher are logged according to the given
action. This syslogd(8) behaves the same, but has some extensions.

In addition to the above mentioned names the syslogd(8) understands
the following extensions: An asterisk (‘‘*’’) stands for all facili-
ties or all priorities, depending on where it is used (before or after
the period). The keyword none stands for no priority of the given
facility.

You can specify multiple facilities with the same priority pattern in
one statement using the comma (‘‘,’’) operator. You may specify as
much facilities as you want. Remember that only the facility part
from such a statement is taken, a priority part would be skipped.

Multiple selectors may be specified for a single action using the
semicolon (‘‘;’’) separator. Remember that each selector in the
selector field is capable to overwrite the preceding ones. Using this
behavior you can exclude some priorities from the pattern.

This syslogd(8) has a syntax extension to the original BSD source,
that makes its use more intuitively. You may precede every priority
with an equation sign (‘‘=’’) to specify only this single priority and
not any of the above. You may also (both is valid, too) precede the
priority with an exclamation mark (‘‘!’’) to ignore all that priori-
ties, either exact this one or this and any higher priority. If you
use both extensions than the exclamation mark must occur before the
equation sign, just use it intuitively.

ACTIONS
The action field of a rule describes the abstract term ‘‘logfile’’. A
‘‘logfile’’ need not to be a real file, btw. The syslogd(8) provides
the following actions.

Regular File
Typically messages are logged to real files. The file has to be spec-
ified with full pathname, beginning with a slash ‘‘/’’.

You may prefix each entry with the minus ‘‘-’’ sign to omit syncing
the file after every logging. Note that you might lose information if
the system crashes right behind a write attempt. Nevertheless this
might give you back some performance, especially if you run programs
that use logging in a very verbose manner.

Named Pipes
This version of syslogd(8) has support for logging output to named
pipes (fifos). A fifo or named pipe can be used as a destination for
log messages by prepending a pipe symbol (‘‘|’’) to the name of the
file. This is handy for debugging. Note that the fifo must be cre-
ated with the mkfifo(1) command before syslogd(8) is started.

Terminal and Console
If the file you specified is a tty, special tty-handling is done, same
with /dev/console.

Remote Machine
This syslogd(8) provides full remote logging, i.e. is able to send
messages to a remote host running syslogd(8) and to receive messages
from remote hosts. The remote host won’t forward the message again,
it will just log them locally. To forward messages to another host,
prepend the hostname with the at sign (‘‘@’’).

Using this feature you’re able to control all syslog messages on one
host, if all other machines will log remotely to that. This tears
down administration needs.

List of Users
Usually critical messages are also directed to ‘‘root’’ on that
machine. You can specify a list of users that shall get the message
by simply writing the login. You may specify more than one user by
separating them with commas (‘‘,’’). If they’re logged in they get
the message. Don’t think a mail would be sent, that might be too
late.

Everyone logged on
Emergency messages often go to all users currently online to notify
them that something strange is happening with the system. To specify
this wall(1)-feature use an asterisk (‘‘*’’).

EXAMPLES
Here are some example, partially taken from a real existing site and
configuration. Hopefully they rub out all questions to the configura-
tion, if not, drop me (Joey) a line.

# Store critical stuff in critical
#
*.=crit;kern.none /var/adm/critical

This will store all messages with the priority crit in the file
/var/adm/critical, except for any kernel message.

# Kernel messages are first, stored in the kernel
# file, critical messages and higher ones also go
# to another host and to the console
#
kern.* /var/adm/kernel
kern.crit @finlandia
kern.crit /dev/console
kern.info;kern.!err /var/adm/kernel-info

The first rule direct any message that has the kernel facility to the
file /var/adm/kernel.

The second statement directs all kernel messages of the priority crit
and higher to the remote host finlandia. This is useful, because if
the host crashes and the disks get irreparable errors you might not be
able to read the stored messages. If they’re on a remote host, too,
you still can try to find out the reason for the crash.

The third rule directs these messages to the actual console, so the
person who works on the machine will get them, too.

The fourth line tells the syslogd to save all kernel messages that
come with priorities from info up to warning in the file /var/adm/ker-
nel-info. Everything from err and higher is excluded.

# The tcp wrapper loggs with mail.info, we display
# all the connections on tty12
#
mail.=info /dev/tty12

This directs all messages that uses mail.info (in source LOG_MAIL |
LOG_INFO) to /dev/tty12, the 12th console. For example the tcpwrapper
tcpd(8) uses this as it’s default.

# Store all mail concerning stuff in a file
#
mail.*;mail.!=info /var/adm/mail

This pattern matches all messages that come with the mail facility,
except for the info priority. These will be stored in the file
/var/adm/mail.

# Log all mail.info and news.info messages to info
#
mail,news.=info /var/adm/info

This will extract all messages that come either with mail.info or with
news.info and store them in the file /var/adm/info.

# Log info and notice messages to messages file
#
*.=info;*.=notice;\
mail.none /var/log/messages

This lets the syslogd log all messages that come with either the info
or the notice facility into the file /var/log/messages, except for all
messages that use the mail facility.

# Log info messages to messages file
#
*.=info;\
mail,news.none /var/log/messages

This statement causes the syslogd to log all messages that come with
the info priority to the file /var/log/messages. But any message com-
ing either with the mail or the news facility will not be stored.

# Emergency messages will be displayed using wall
#
*.=emerg *

This rule tells the syslogd to write all emergency messages to all
currently logged in users. This is the wall action.

# Messages of the priority alert will be directed
# to the operator
#
*.alert root,joey

This rule directs all messages with a priority of alert or higher to
the terminals of the operator, i.e. of the users ‘‘root’’ and ‘‘joey’’
if they’re logged in.

*.* @finlandia

This rule would redirect all messages to a remote host called finlan-
dia. This is useful especially in a cluster of machines where all
syslog messages will be stored on only one machine.

CONFIGURATION FILE SYNTAX DIFFERENCES
Syslogd uses a slightly different syntax for its configuration file
than the original BSD sources. Originally all messages of a specific
priority and above were forwarded to the log file. The modifiers
‘‘=’’, ‘‘!’’ and ‘‘-’’ were added to make the syslogd more flexible
and to use it in a more intuitive manner.

The original BSD syslogd doesn’t understand spaces as separators
between the selector and the action field.

FILES
/etc/syslog.conf
Configuration file for syslogd

BUGS
The effects of multiple selectors are sometimes not intuitive. For
example ‘‘mail.crit,*.err’’ will select ‘‘mail’’ facility messages at
the level of ‘‘err’’ or higher, not at the level of ‘‘crit’’ or
higher.

SEE ALSO
sysklogd(8), klogd(8), logger(1), syslog(2), syslog(3)

AUTHORS
The syslogd is taken from BSD sources, Greg Wettstein
(greg@wind.enjellic.com) performed the port to Linux, Martin Schulze
(joey@linux.de) made some bugfixes and added some new features.

Version 1.3 1 January 1998 SYSLOG.CONF(5)