nanorc
NANORC(5) NANORC(5)
NAME
nanorc - GNU nano’s rcfile
DESCRIPTION
This manual page briefly documents GNU nano’s rcfile.
nano is a small, free and friendly editor which aims to replace Pico,
the default editor included in the non-free Pine package. Rather than
just copying Pico’s look and feel, nano also implements some missing
(or disabled by default) features in Pico, such as "search and
replace" and "go to line and column number".
The nanorc file contains the default settings for nano. It should not
be in DOS or Mac format. During startup, nano will first read its
system-wide settings from SYSCONFDIR/nanorc, and then user-specific
settings from ~/.nanorc.
OPTIONS
The configuration file accepts a series of set and unset commands,
which can be used to configure nano on startup without using the com-
mand line options. Additionally, the syntax, color, and icolor key-
words are used to define syntax highlighting rules for different text
patterns. nano will read one command per line.
Options in nanorc files take precedence over nano’s defaults, and com-
mand line options override nanorc settings. Also, options are unset
by default, except for those that take arguments.
Quotes inside string parameters don’t have to be escaped with back-
slashes. The last double quote in the string will be treated as its
end. For example, for the brackets option, ""’)>]}" will match ", ’,
), >, ], and }.
The supported commands and arguments are:
set/unset autoindent
Use auto-indentation.
set/unset backup
Create backup files in filename~.
set backupdir directory
Set the directory where nano puts unique backup files if file back-
ups are enabled.
set/unset backwards
Do backwards searches by default.
set/unset boldtext
Use bold text instead of reverse video text.
set brackets string
Set the characters treated as closing brackets when justifying
paragraphs. They cannot contain blank characters. Only closing
punctuation, optionally followed by closing brackets, can end sen-
tences. The default value is ""’)>]}".
set/unset casesensitive
Do case sensitive searches by default.
set/unset const
Constantly display the cursor position in the status bar.
set/unset cut
Use cut to end of line by default.
set fill n
Wrap lines at column number n. If n is 0 or less, the maximum line
length will be the screen width less n columns. The default value
is -8.
set/unset historylog
Enable ~/.nano_history for saving and reading search/replace
strings.
set matchbrackets string
Set the opening and closing brackets that can be found by bracket
searches. They cannot contain blank characters. The former set
must come before the latter set, and both must be in the same
order. The default value is "(<[{)>]}".
set/unset morespace
Use the blank line below the titlebar as extra editing space.
set/unset mouse
Enable mouse support, if available for your system. When enabled,
mouse clicks can be used to place the cursor, set the mark (with a
double click), and execute shortcuts. The mouse will work in the X
Window System, and on the console when gpm is running.
set/unset multibuffer
Allow inserting files into their own buffers.
set/unset noconvert
Don’t convert files from DOS/Mac format.
set/unset nofollow
Don’t follow symlinks when writing files.
set/unset nohelp
Don’t display the help lists at the bottom of the screen.
set/unset nonewlines
Don’t add newlines to the ends of files.
set/unset nowrap
Don’t wrap text at all.
set operatingdir directory
nano will only read and write files inside directory and its subdi-
rectories. Also, the current directory is changed to here, so
files are inserted from this diractory. By default, the operating
directory feature is turned off.
set/unset preserve
Preserve the XON and XOFF keys (^Q and ^S).
set punct string
Set the characters treated as closing punctuation when justifying
paragraphs. They cannot contain blank characters. Only closing
punctuation, optionally followed by closing brackets, can end sen-
tences. The default value is "!.?".
set/unset quickblank
Do quick statusbar blanking. Statusbar messages will disappear
after 1 keystroke instead of 25.
set quotestr string
The email-quote string, used to justify email-quoted paragraphs.
This is an extended regular expression if your system supports
them, otherwise a literal string. The default value is
"^([ \t]*[#:>\|}])+" if you have extended regular expression sup-
port, or "> " otherwise. Note that ’\t’ stands for a literal Tab
character.
set/unset rebinddelete
Interpret the Delete key differently so that both Backspace and
Delete work properly. You should only need to use this option if
Backspace acts like Delete on your system.
set/unset rebindkeypad
Interpret the numeric keypad keys so that they all work properly.
You should only need to use this option if they don’t, as mouse
support won’t work properly with this option enabled.
set/unset regexp
Do extended regular expression searches by default.
set/unset smarthome
Make the Home key smarter. When Home is pressed anywhere but at
the very beginning of non-whitespace characters on a line, the cur-
sor will jump to that beginning (either forwards or backwards). If
the cursor is already at that position, it will jump to the true
beginning of the line.
set/unset smooth
Use smooth scrolling by default.
set speller spellprog
Use spelling checker spellprog instead of the built-in one, which
calls spell.
set/unset suspend
Allow nano to be suspended.
set tabsize n
Use a tab size of n columns. The value of n must be greater than
0. The default value is 8.
set/unset tabstospaces
Convert typed tabs to spaces.
set/unset tempfile
Save automatically on exit, don’t prompt.
set/unset view
Disallow file modification.
set whitespace string
Set the two characters used to display the first characters of tabs
and spaces. They must be single-column characters.
set/unset wordbounds
Detect word boundaries more accurately by treating punctuation
characters as parts of words.
syntax str ["fileregex" ... ]
Defines a syntax named str which can be activated via the -Y/--syn-
tax command line option, or will be automatically activated if the
current filename matches the extended regular expression fileregex.
All following color and icolor statements will apply to syntax
until a new syntax is defined.
The none syntax is reserved; specifying it on the command line is
the same as not having a syntax at all. The default syntax is spe-
cial: it takes no fileregex, and applies to files that don’t match
any other syntax’s fileregex.
color fgcolor,bgcolor regex ...
For the currently defined syntax, display all expressions matching
the extended regular expression regex with foreground color fgcolor
and background color bgcolor, at least one of which must be speci-
fied. Legal colors for foreground and background color are: white,
black, red, blue, green, yellow, magenta, and cyan. You may use
the prefix "bright" to force a stronger color highlight for the
foreground. If your terminal supports transparency, not specifying
a bgcolor tells nano to attempt to use a transparent background.
icolor fgcolor,bgcolor regex ...
Same as above, except that the expression matching is case insensi-
tive.
color fgcolor,bgcolor start="sr" end="er"
Display expressions which start with the extended regular expres-
sion sr and end with the extended regular expression er with fore-
ground color fgcolor and background color bgcolor, at least one of
which must be specified. This allows syntax highlighting to span
multiple lines. Note that all subsequent instances of sr after an
initial sr is found will be highlighted until the first instance of
er.
icolor fgcolor,bgcolor start="sr" end="er"
Same as above, except that the expression matching is case insensi-
tive.
include syntaxfile
Read in self-contained color syntaxes from syntaxfile. Note that
syntaxfile can only contain syntax, color, and icolor commands.
FILES
SYSCONFDIR/nanorc
System-wide configuration file
~/.nanorc
Per-user configuration file
SEE ALSO
nano(1)
/usr/share/doc/nano/examples/nanorc.sample (or equivalent on your sys-
tem)
AUTHOR
Chris Allegretta <chrisa@asty.org>, et al (see AUTHORS and THANKS for
details). This manual page was originally written by Jordi Mallach
<jordi@gnu.org>, for the Debian system (but may be used by others).
October 28, 2006 version 2.0.0 NANORC(5)
