fcntl
FCNTL(2) Linux Programmer’s Manual FCNTL(2)
NAME
fcntl - manipulate file descriptor
SYNOPSIS
#include <unistd.h>
#include <fcntl.h>
int fcntl(int fd, int cmd);
int fcntl(int fd, int cmd, long arg);
int fcntl(int fd, int cmd, struct flock *lock);
DESCRIPTION
fcntl performs one of various miscellaneous operations on fd. The
operation in question is determined by cmd.
Handling close-on-exec
F_DUPFD
Find the lowest numbered available file descriptor greater than
or equal to arg and make it be a copy of fd. This is different
form dup2(2) which uses exactly the descriptor specified.
The old and new descriptors may be used interchangeably. They
share locks, file position pointers and flags; for example, if
the file position is modified by using lseek on one of the
descriptors, the position is also changed for the other.
The two descriptors do not share the close-on-exec flag, how-
ever. The close-on-exec flag of the copy is off, meaning that
it will not be closed on exec.
On success, the new descriptor is returned.
F_GETFD
Read the close-on-exec flag. If the FD_CLOEXEC bit is 0, the
file will remain open across exec, otherwise it will be closed.
F_SETFD
Set the close-on-exec flag to the value specified by the
FD_CLOEXEC bit of arg.
The file status flags
A file descriptor has certain associated flags, initialized by open(2)
and possibly modified by fcntl(2). The flags are shared between
copies (made with dup(2), fork(2), etc.) of the same file descriptor.
The flags and their semantics are described in open(2).
F_GETFL
Read the file descriptor’s flags.
F_SETFL
Set the file status flags part of the descriptor’s flags to the
value specified by arg. Remaining bits (access mode, file cre-
ation flags) in arg are ignored. On Linux this command can
only change the O_APPEND, O_NONBLOCK, O_ASYNC, and O_DIRECT
flags.
Advisory locking
F_GETLK, F_SETLK and F_SETLKW are used to acquire, release, and test
for the existence of record locks (also known as file-segment or file-
region locks). The third argument lock is a pointer to a structure
that has at least the following fields (in unspecified order).
struct flock {
...
short l_type; /* Type of lock: F_RDLCK,
F_WRLCK, F_UNLCK */
short l_whence; /* How to interpret l_start:
SEEK_SET, SEEK_CUR, SEEK_END */
off_t l_start; /* Starting offset for lock */
off_t l_len; /* Number of bytes to lock */
pid_t l_pid; /* PID of process blocking our lock
(F_GETLK only) */
...
};
The l_whence, l_start, and l_len fields of this structure specify the
range of bytes we wish to lock. l_start is the starting offset for
the lock, and is interpreted relative to either: the start of the file
(if l_whence is SEEK_SET); the current file offset (if l_whence is
SEEK_CUR); or the end of the file (if l_whence is SEEK_END). In the
final two cases, l_start can be a negative number provided the offset
does not lie before the start of the file. l_len is a non-negative
integer (but see the NOTES below) specifying the number of bytes to be
locked. Bytes past the end of the file may be locked, but not bytes
before the start of the file. Specifying 0 for l_len has the special
meaning: lock all bytes starting at the location specified by l_whence
and l_start through to the end of file, no matter how large the file
grows.
The l_type field can be used to place a read (F_RDLCK) or a write
(F_WDLCK) lock on a file. Any number of processes may hold a read
lock (shared lock) on a file region, but only one process may hold a
write lock (exclusive lock). An exclusive lock excludes all other
locks, both shared and exclusive. A single process can hold only one
type of lock on a file region; if a new lock is applied to an already-
locked region, then the existing lock is converted to the the new lock
type. (Such conversions may involve splitting, shrinking, or coalesc-
ing with an existing lock if the byte range specified by the new lock
does not precisely coincide with the range of the existing lock.)
F_SETLK
Acquire a lock (when l_type is F_RDLCK or F_WRLCK) or release a
lock (when l_type is F_UNLCK) on the bytes specified by the
l_whence, l_start, and l_len fields of lock. If a conflicting
lock is held by another process, this call returns -1 and sets
errno to EACCES or EAGAIN.
F_SETLKW
As for F_SETLK, but if a conflicting lock is held on the file,
then wait for that lock to be released. If a signal is caught
while waiting, then the call is interrupted and (after the sig-
nal handler has returned) returns immediately (with return
value -1 and errno set to EINTR).
F_GETLK
On input to this call, lock describes a lock we would like to
place on the file. If the lock could be placed, fcntl() does
not actually place it, but returns F_UNLCK in the l_type field
of lock and leaves the other fields of the structure unchanged.
If one or more incompatible locks would prevent this lock being
placed, then fcntl() returns details about one of these locks
in the l_type, l_whence, l_start, and l_len fields of lock and
sets l_pid to be the PID of the process holding that lock.
In order to place a read lock, fd must be open for reading. In order
to place a write lock, fd must be open for writing. To place both
types of lock, open a file read-write.
As well as being removed by an explicit F_UNLCK, record locks are
automatically released when the process terminates or if it closes any
file descriptor referring to a file on which locks are held. This is
bad: it means that a process can lose the locks on a file like
/etc/passwd or /etc/mtab when for some reason a library function
decides to open, read and close it.
Record locks are not inherited by a child created via fork(2), but are
preserved across an execve(2).
Because of the buffering performed by the stdio(3) library, the use of
record locking with routines in that package should be avoided; use
read(2) and write(2) instead.
Mandatory locking
(Non-POSIX.) The above record locks may be either advisory or manda-
tory, and are advisory by default. To make use of mandatory locks,
mandatory locking must be enabled (using the "-o mand" option to
mount(8)) for the file system containing the file to be locked and
enabled on the file itself (by disabling group execute permission on
the file and enabling the set-GID permission bit).
Advisory locks are not enforced and are useful only between cooperat-
ing processes. Mandatory locks are enforced for all processes.
Managing signals
F_GETOWN, F_SETOWN, F_GETSIG and F_SETSIG are used to manage I/O
availability signals:
F_GETOWN
Get the process ID or process group currently receiving SIGIO
and SIGURG signals for events on file descriptor fd. Process
groups are returned as negative values.
F_SETOWN
Set the process ID or process group that will receive SIGIO and
SIGURG signals for events on file descriptor fd. Process
groups are specified using negative values. (F_SETSIG can be
used to specify a different signal instead of SIGIO).
If you set the O_ASYNC status flag on a file descriptor (either
by providing this flag with the open(2) call, or by using the
F_SETFL command of fcntl), a SIGIO signal is sent whenever
input or output becomes possible on that file descriptor.
The process or process group to receive the signal can be
selected by using the F_SETOWN command to the fcntl function.
If the file descriptor is a socket, this also selects the
recipient of SIGURG signals that are delivered when out-of-band
data arrives on that socket. (SIGURG is sent in any situation
where select(2) would report the socket as having an "excep-
tional condition".) If the file descriptor corresponds to a
terminal device, then SIGIO signals are sent to the foreground
process group of the terminal.
F_GETSIG
Get the signal sent when input or output becomes possible. A
value of zero means SIGIO is sent. Any other value (including
SIGIO) is the signal sent instead, and in this case additional
info is available to the signal handler if installed with
SA_SIGINFO.
F_SETSIG
Sets the signal sent when input or output becomes possible. A
value of zero means to send the default SIGIO signal. Any
other value (including SIGIO) is the signal to send instead,
and in this case additional info is available to the signal
handler if installed with SA_SIGINFO.
By using F_SETSIG with a non-zero value, and setting SA_SIGINFO
for the signal handler (see sigaction(2)), extra information
about I/O events is passed to the handler in a siginfo_t struc-
ture. If the si_code field indicates the source is SI_SIGIO,
the si_fd field gives the file descriptor associated with the
event. Otherwise, there is no indication which file descrip-
tors are pending, and you should use the usual mechanisms
(select(2), poll(2), read(2) with O_NONBLOCK set etc.) to
determine which file descriptors are available for I/O.
By selecting a POSIX.1b real time signal (value >= SIGRTMIN),
multiple I/O events may be queued using the same signal num-
bers. (Queuing is dependent on available memory). Extra
information is available if SA_SIGINFO is set for the signal
handler, as above.
Using these mechanisms, a program can implement fully asynchronous I/O
without using select(2) or poll(2) most of the time.
The use of O_ASYNC, F_GETOWN, F_SETOWN is specific to BSD and Linux.
F_GETSIG and F_SETSIG are Linux-specific. POSIX has asynchronous I/O
and the aio_sigevent structure to achieve similar things; these are
also available in Linux as part of the GNU C Library (Glibc).
Leases
F_SETLEASE and F_GETLEASE (Linux 2.4 onwards) are used (respectively)
to establish and retrieve the current setting of the calling process’s
lease on the file referred to by fd. A file lease provides a mecha-
nism whereby the process holding the lease (the "lease holder") is
notified (via delivery of a signal) when another process (the "lease
breaker") tries to open(2) or truncate(2) that file.
F_SETLEASE
Set or remove a file lease according to which of the following
values is specified in the integer arg:
F_RDLCK
Take out a read lease. This will cause us to be noti-
fied when another process opens the file for writing or
truncates it.
F_WRLCK
Take out a write lease. This will cause us to be noti-
fied when another process opens the file (for reading or
writing) or truncates it. A write lease may be placed
on a file only if no other process currently has the
file open.
F_UNLCK
Remove our lease from the file.
A process may hold only one type of lease on a file.
Leases may only be taken out on regular files. An unprivileged pro-
cess may only take out a lease on a file whose UID matches the file
system UID of the process.
F_GETLEASE
Indicates what type of lease we hold on the file referred to by
fd by returning either F_RDLCK, F_WRLCK, or F_UNLCK, indicat-
ing, respectively, that the calling process holds a read, a
write, or no lease on the file. (The third argument to fcntl()
is omitted.)
When a process (the "lease breaker") performs an open() or truncate()
that conflicts with a lease established via F_SETLEASE, the system
call is blocked by the kernel, unless the O_NONBLOCK flag was speci-
fied to open(), in which case the system call will return with the
error EWOULDBLOCK. The kernel notifies the lease holder by sending it
a signal (SIGIO by default). The lease holder should respond to
receipt of this signal by doing whatever cleanup is required in prepa-
ration for the file to be accessed by another process (e.g., flushing
cached buffers) and then either remove or downgrade its lease. A
lease is removed by performing an F_SETLEASE command specifying arg as
F_UNLCK. If we currently hold a write lease on the file, and the
lease breaker is opening the file for reading, then it is sufficient
to downgrade the lease to a read lease. This is done by performing an
F_SETLEASE command specifying arg as F_RDLCK.
If the lease holder fails to downgrade or remove the lease within the
number of seconds specified in /proc/sys/fs/lease-break-time then the
kernel forcibly removes or downgrades the lease holder’s lease.
Once the lease has been voluntarily or forcibly removed or downgraded,
and assuming the lease breaker has not unblocked its system call, the
kernel permits the lease breaker’s system call to proceed.
The default signal used to notify the lease holder is SIGIO, but this
can be changed using the F_SETSIG command to fcntl (). If a F_SETSIG
command is performed (even one specifying SIGIO), and the signal han-
dler is established using SA_SIGINFO, then the handler will receive a
siginfo_t sructure as its second argument, and the si_fd field of this
argument will hold the descriptor of the leased file that has been
accessed by another process. (This is useful if the caller holds
leases against multiple files).
File and directory change notification
F_NOTIFY
(Linux 2.4 onwards) Provide notification when the directory
referred to by fd or any of the files that it contains is
changed. The events to be notified are specified in arg, which
is a bit mask specified by ORing together zero or more of the
following bits:
Bit Description (event in directory)
-------------------------------------------------------------
DN_ACCESS A file was accessed (read, pread, readv)
DN_MODIFY A file was modified (write, pwrite,
writev, truncate, ftruncate)
DN_CREATE A file was created (open, creat, mknod,
mkdir, link, symlink, rename)
DN_DELETE A file was unlinked (unlink, rename to
another directory, rmdir)
DN_RENAME A file was renamed within this
directory (rename)
DN_ATTRIB The attributes of a file were changed
(chown, chmod, utime[s])
(In order to obtain these definitions, the _GNU_SOURCE macro
must be defined before including <fcntl.h>.)
Directory notifications are normally "one-shot", and the
application must re-register to receive further notifications.
Alternatively, if DN_MULTISHOT is included in arg, then notifi-
cation will remain in effect until explicitly removed.
A series of F_NOTIFY requests is cumulative, with the events in
arg being added to the set already monitored. To disable noti-
fication of all events, make an F_NOTIFY call specifying arg as
0.
Notification occurs via delivery of a signal. The default sig-
nal is SIGIO, but this can be changed using the F_SETSIG com-
mand to fcntl(). In the latter case, the signal handler
receives a siginfo_t structure as its second argument (if the
handler was established using SA_SIGINFO) and the si_fd field
of this structure contains the file descriptor which generated
the notification (useful when establishing notification on mul-
tiple directories).
Especially when using DN_MULTISHOT, a POSIX.1b real time signal
should be used for notication, so that multiple notifications
can be queued.
RETURN VALUE
For a successful call, the return value depends on the operation:
F_DUPFD The new descriptor.
F_GETFD Value of flag.
F_GETFL Value of flags.
F_GETOWN Value of descriptor owner.
F_GETSIG Value of signal sent when read or write becomes possible, or
zero for traditional SIGIO behaviour.
All other commands
Zero.
On error, -1 is returned, and errno is set appropriately.
ERRORS
EACCES or EAGAIN
Operation is prohibited by locks held by other processes. Or,
operation is prohibited because the file has been memory-mapped
by another process.
EBADF fd is not an open file descriptor, or the command was F_SETLK
or F_SETLKW and the file descriptor open mode doesn’t match
with the type of lock requested.
EDEADLK
It was detected that the specified F_SETLKW command would cause
a deadlock.
EFAULT lock is outside your accessible address space.
EINTR For F_SETLKW, the command was interrupted by a signal. For
F_GETLK and F_SETLK, the command was interrupted by a signal
before the lock was checked or acquired. Most likely when
locking a remote file (e.g. locking over NFS), but can some-
times happen locally.
EINVAL For F_DUPFD, arg is negative or is greater than the maximum
allowable value. For F_SETSIG, arg is not an allowable signal
number.
EMFILE For F_DUPFD, the process already has the maximum number of file
descriptors open.
ENOLCK Too many segment locks open, lock table is full, or a remote
locking protocol failed (e.g. locking over NFS).
EPERM Attempted to clear the O_APPEND flag on a file that has the
append-only attribute set.
NOTES
The errors returned by dup2 are different from those returned by
F_DUPFD.
Since kernel 2.0, there is no interaction between the types of lock
placed by flock(2) and fcntl(2).
POSIX 1003.1-2001 allows l_len to be negative. (And if it is, the
interval described by the lock covers bytes l_start+l_len up to and
including l_start-1.) This is supported by Linux since Linux 2.4.21
and 2.5.49.
Several systems have more fields in struct flock such as e.g.
l_sysid. Clearly, l_pid alone is not going to be very useful if the
process holding the lock may live on a different machine.
CONFORMING TO
SVr4, SVID, POSIX, X/OPEN, BSD 4.3. Only the operations F_DUPFD,
F_GETFD, F_SETFD, F_GETFL, F_SETFL, F_GETLK, F_SETLK and F_SETLKW are
specified in POSIX.1. F_GETOWN and F_SETOWN are BSDisms not supported
in SVr4; F_GETSIG and F_SETSIG are specific to Linux. F_NOTIFY,
F_GETLEASE, and F_SETLEASE are Linux specific. (Define the
_GNU_SOURCE macro before including <fcntl.h> to obtain these defini-
tions.) The flags legal for F_GETFL/F_SETFL are those supported by
open(2) and vary between these systems; O_APPEND, O_NONBLOCK,
O_RDONLY, and O_RDWR are specified in POSIX.1. SVr4 supports several
other options and flags not documented here.
SVr4 documents additional EIO, ENOLINK and EOVERFLOW error conditions.
SEE ALSO
dup2(2), flock(2), lockf(3), open(2), socket(2)
See also locks.txt, mandatory.txt, and dnotify.txt in
/usr/src/linux/Documentation.
Linux-2.6.3 2004-03-03 FCNTL(2)
