CPAN::FirstTime
CPAN::FirstTime(3) User Contributed Perl Documentation CPAN::FirstTime(3)
NAME
CPAN::FirstTime - Utility for CPAN::Config file Initialization
SYNOPSIS
CPAN::FirstTime::init()
DESCRIPTION
The init routine asks a few questions and writes a CPAN/Config.pm or
CPAN/MyConfig.pm file (depending on what it is currently using).
In the following all questions and explanations regarding config vari-
ables are collected.
auto_commit
Normally CPAN.pm keeps config variables in memory and changes need
to be saved in a separate ’o conf commit’ command to make them per-
manent between sessions. If you set the ’auto_commit’ option to
true, changes to a config variable are always automatically commit-
ted to disk.
Always commit changes to config variables to disk?
build_cache
CPAN.pm can limit the size of the disk area for keeping the build
directories with all the intermediate files.
Cache size for build directory (in MB)?
build_dir
Directory where the build process takes place?
build_dir_reuse
Until version 1.88 CPAN.pm never trusted the contents of the
build_dir directory between sessions. Since 1.88_58 CPAN.pm has a
YAML-based mechanism that makes it possible to share the contents of
the build_dir/ directory between different sessions with the same
version of perl. People who prefer to test things several days
before installing will like this feature because it safes a lot of
time.
If you say yes to the following question, CPAN will try to store
enough information about the build process so that it can pick up in
future sessions at the same state of affairs as it left a previous
session.
Store and re-use state information about distributions between
CPAN.pm sessions?
build_requires_install_policy
When a module declares another one as a ’build_requires’ prerequi-
site this means that the other module is only needed for building or
testing the module but need not be installed permanently. In this
case you may wish to install that other module nonetheless or just
keep it in the ’build_dir’ directory to have it available only tem-
porarily. Installing saves time on future installations but makes
the perl installation bigger.
You can choose if you want to always install (yes), never install
(no) or be always asked. In the latter case you can set the default
answer for the question to yes (ask/yes) or no (ask/no).
Policy on installing ’build_requires’ modules (yes, no, ask/yes,
ask/no)?
cache_metadata
To considerably speed up the initial CPAN shell startup, it is pos-
sible to use Storable to create a cache of metadata. If Storable is
not available, the normal index mechanism will be used.
Note: this mechanism is not used when use_sqlite is on and SQLLite
is running.
Cache metadata (yes/no)?
check_sigs
CPAN packages can be digitally signed by authors and thus verified
with the security provided by strong cryptography. The exact mecha-
nism is defined in the Module::Signature module. While this is gen-
erally considered a good thing, it is not always convenient to the
end user to install modules that are signed incorrectly or where the
key of the author is not available or where some prerequisite for
Module::Signature has a bug and so on.
With the check_sigs parameter you can turn signature checking on and
off. The default is off for now because the whole tool chain for the
functionality is not yet considered mature by some. The author of
CPAN.pm would recommend setting it to true most of the time and
turning it off only if it turns out to be annoying.
Note that if you do not have Module::Signature installed, no signa-
ture checks will be performed at all.
Always try to check and verify signatures if a SIGNATURE file is in
the package and Module::Signature is installed (yes/no)?
colorize_output
When you have Term::ANSIColor installed, you can turn on colorized
output to have some visual differences between normal CPAN.pm out-
put, warnings, debugging output, and the output of the modules being
installed. Set your favorite colors after some experimenting with
the Term::ANSIColor module.
Do you want to turn on colored output?
colorize_print
Color for normal output?
colorize_warn
Color for warnings?
colorize_debug
Color for debugging messages?
commandnumber_in_prompt
The prompt of the cpan shell can contain the current command number
for easier tracking of the session or be a plain string.
Do you want the command number in the prompt (yes/no)?
connect_to_internet_ok
If you have never defined your own "urllist" in your configuration
then "CPAN.pm" will be hesitant to use the built in default sites
for downloading. It will ask you once per session if a connection to
the internet is OK and only if you say yes, it will try to connect.
But to avoid this question, you can choose your favorite download
sites once and get away with it. Or, if you have no favorite down-
load sites answer yes to the following question.
If no urllist has been chosen yet, would you prefer CPAN.pm to con-
nect to the built-in default sites without asking? (yes/no)?
ftp_passive
Shall we always set the FTP_PASSIVE environment variable when deal-
ing with ftp download (yes/no)?
ftpstats_period
Statistics about downloads are truncated by size and period simulta-
neously.
How many days shall we keep statistics about downloads?
ftpstats_size
Statistics about downloads are truncated by size and period simulta-
neously.
How many items shall we keep in the statistics about downloads?
getcwd
CPAN.pm changes the current working directory often and needs to
determine its own current working directory. Per default it uses
Cwd::cwd but if this doesn’t work on your system for some reason,
alternatives can be configured according to the following table:
cwd Cwd::cwd
getcwd Cwd::getcwd
fastcwd Cwd::fastcwd
backtickcwd external command cwd
Preferred method for determining the current working directory?
halt_on_failure
Normaly, CPAN.pm continues processing the full list of targets and
dependencies, even if one of them fails. However, you can specify
that CPAN should halt after the first failure.
Do you want to halt on failure (yes/no)?
histfile
If you have one of the readline packages (Term::ReadLine::Perl,
Term::ReadLine::Gnu, possibly others) installed, the interactive
CPAN shell will have history support. The next two questions deal
with the filename of the history file and with its size. If you do
not want to set this variable, please hit SPACE RETURN to the fol-
lowing question.
File to save your history?
histsize
Number of lines to save?
inactivity_timeout
Sometimes you may wish to leave the processes run by CPAN alone
without caring about them. Because the Makefile.PL or the Build.PL
sometimes contains question you’re expected to answer, you can set a
timer that will kill a ’perl Makefile.PL’ process after the speci-
fied time in seconds.
If you set this value to 0, these processes will wait forever. This
is the default and recommended setting.
Timeout for inactivity during {Makefile,Build}.PL?
index_expire
The CPAN indexes are usually rebuilt once or twice per hour, but the
typical CPAN mirror mirrors only once or twice per day. Depending on
the quality of your mirror and your desire to be on the bleeding
edge, you may want to set the following value to more or less than
one day (which is the default). It determines after how many days
CPAN.pm downloads new indexes.
Let the index expire after how many days?
inhibit_startup_message
When the CPAN shell is started it normally displays a greeting mes-
sage that contains the running version and the status of readline
support.
Do you want to turn this message off?
keep_source_where
Unless you are accessing the CPAN on your filesystem via a file:
URL, CPAN.pm needs to keep the source files it downloads somewhere.
Please supply a directory where the downloaded files are to be kept.
Download target directory?
load_module_verbosity
When CPAN.pm loads a module it needs for some optional feature, it
usually reports about module name and version. Choose ’v’ to get
this message, ’none’ to suppress it.
Verbosity level for loading modules (none or v)?
makepl_arg
Every Makefile.PL is run by perl in a separate process. Likewise we
run ’make’ and ’make install’ in separate processes. If you have any
parameters (e.g. PREFIX, UNINST or the like) you want to pass to the
calls, please specify them here.
If you don’t understand this question, just press ENTER.
Typical frequently used settings:
PREFIX=~/perl # non-root users (please see manual for more hints)
Parameters for the ’perl Makefile.PL’ command?
make_arg
Parameters for the ’make’ command? Typical frequently used setting:
-j3 # dual processor system (on GNU make)
Your choice:
make_install_arg
Parameters for the ’make install’ command? Typical frequently used
setting:
UNINST=1 # to always uninstall potentially conflicting files
Your choice:
make_install_make_command
Do you want to use a different make command for ’make install’?
Cautious people will probably prefer:
su root -c make
or
sudo make
or
/path1/to/sudo -u admin_account /path2/to/make
or some such. Your choice:
mbuildpl_arg
A Build.PL is run by perl in a separate process. Likewise we run
’./Build’ and ’./Build install’ in separate processes. If you have
any parameters you want to pass to the calls, please specify them
here.
Typical frequently used settings:
--install_base /home/xxx # different installation directory
Parameters for the ’perl Build.PL’ command?
mbuild_arg
Parameters for the ’./Build’ command? Setting might be:
--extra_linker_flags -L/usr/foo/lib # non-standard library location
Your choice:
mbuild_install_arg
Parameters for the ’./Build install’ command? Typical frequently
used setting:
--uninst 1 # uninstall conflicting files
Your choice:
mbuild_install_build_command
Do you want to use a different command for ’./Build install’? Sudo
users will probably prefer:
su root -c ./Build
or
sudo ./Build
or
/path1/to/sudo -u admin_account ./Build
or some such. Your choice:
pager
What is your favorite pager program?
prefer_installer
When you have Module::Build installed and a module comes with both a
Makefile.PL and a Build.PL, which shall have precedence?
The main two standard installer modules are the old and well estab-
lished ExtUtils::MakeMaker (for short: EUMM) which uses the Make-
file.PL. And the next generation installer Module::Build (MB) which
works with the Build.PL (and often comes with a Makefile.PL too). If
a module comes only with one of the two we will use that one but if
both are supplied then a decision must be made between EUMM and MB.
See also http://rt.cpan.org/Ticket/Display.html?id=29235 for a dis-
cussion about the right default.
Or, as a third option you can choose RAND which will make a random
decision (something regular CPAN testers will enjoy).
In case you can choose between running a Makefile.PL or a Build.PL,
which installer would you prefer (EUMM or MB or RAND)?
prefs_dir
CPAN.pm can store customized build environments based on regular
expressions for distribution names. These are YAML files where the
default options for CPAN.pm and the environment can be overridden
and dialog sequences can be stored that can later be executed by an
Expect.pm object. The CPAN.pm distribution comes with some prefab
YAML files that cover sample distributions that can be used as
blueprints to store one own prefs. Please check out the distroprefs/
directory of the CPAN.pm distribution to get a quick start into the
prefs system.
Directory where to store default options/environment/dialogs for
building modules that need some customization?
prerequisites_policy
The CPAN module can detect when a module which you are trying to
build depends on prerequisites. If this happens, it can build the
prerequisites for you automatically (’follow’), ask you for confir-
mation (’ask’), or just ignore them (’ignore’). Please set your pol-
icy to one of the three values.
Policy on building prerequisites (follow, ask or ignore)?
randomize_urllist
CPAN.pm can introduce some randomness when using hosts for download
that are configured in the urllist parameter. Enter a numeric value
between 0 and 1 to indicate how often you want to let CPAN.pm try a
random host from the urllist. A value of one specifies to always use
a random host as the first try. A value of zero means no randomness
at all. Anything in between specifies how often, on average, a ran-
dom host should be tried first.
Randomize parameter
scan_cache
By default, each time the CPAN module is started, cache scanning is
performed to keep the cache size in sync. To prevent this, answer
’never’.
Perform cache scanning (atstart or never)?
shell
What is your favorite shell?
show_unparsable_versions
During the ’r’ command CPAN.pm finds modules without version number.
When the command finishes, it prints a report about this. If you
want this report to be very verbose, say yes to the following vari-
able.
Show all individual modules that have no $VERSION?
show_upload_date
The ’d’ and the ’m’ command normally only show you information they
have in their in-memory database and thus will never connect to the
internet. If you set the ’show_upload_date’ variable to true, ’m’
and ’d’ will additionally show you the upload date of the module or
distribution. Per default this feature is off because it may require
a net connection to get at the upload date.
Always try to show upload date with ’d’ and ’m’ command (yes/no)?
show_zero_versions
During the ’r’ command CPAN.pm finds modules with a version number
of zero. When the command finishes, it prints a report about this.
If you want this report to be very verbose, say yes to the following
variable.
Show all individual modules that have a $VERSION of zero?
tar_verbosity
When CPAN.pm uses the tar command, which switch for the verbosity
shall be used? Choose ’none’ for quiet operation, ’v’ for file name
listing, ’vv’ for full listing.
Tar command verbosity level (none or v or vv)?
term_is_latin
The next option deals with the charset (aka character set) your ter-
minal supports. In general, CPAN is English speaking territory, so
the charset does not matter much but some CPAN have names that are
outside the ASCII range. If your terminal supports UTF-8, you should
say no to the next question. If it expects ISO-8859-1 (also known as
LATIN1) then you should say yes. If it supports neither, your answer
does not matter because you will not be able to read the names of
some authors anyway. If you answer no, names will be output in
UTF-8.
Your terminal expects ISO-8859-1 (yes/no)?
term_ornaments
When using Term::ReadLine, you can turn ornaments on so that your
input stands out against the output from CPAN.pm.
Do you want to turn ornaments on?
test_report
The goal of the CPAN Testers project (http://testers.cpan.org/) is
to test as many CPAN packages as possible on as many platforms as
possible. This provides valuable feedback to module authors and
potential users to identify bugs or platform compatibility issues
and improves the overall quality and value of CPAN.
One way you can contribute is to send test results for each module
that you install. If you install the CPAN::Reporter module, you
have the option to automatically generate and email test reports to
CPAN Testers whenever you run tests on a CPAN package.
See the CPAN::Reporter documentation for additional details and con-
figuration settings. If your firewall blocks outgoing email, you
will need to configure CPAN::Reporter before sending reports.
Email test reports if CPAN::Reporter is installed (yes/no)?
perl5lib_verbosity
When CPAN.pm extends @INC via PERL5LIB, it prints a list of directo-
ries added (or a summary of how many directories are added). Choose
’v’ to get this message, ’none’ to suppress it.
Verbosity level for PERL5LIB changes (none or v)?
trust_test_report_history
When a distribution has already been tested by CPAN::Reporter on
this machine, CPAN can skip the test phase and just rely on the test
report history instead.
Note that this will not apply to distributions that failed tests
because of missing dependencies. Also, tests can be run regardless
of the history using "force".
Do you want to rely on the test report history (yes/no)?
use_sqlite
CPAN::SQLite is a layer between the index files that are downloaded
from the CPAN and CPAN.pm that speeds up metadata queries and
reduces memory consumption of CPAN.pm considerably.
Use CPAN::SQLite if available? (yes/no)?
yaml_load_code
Both YAML.pm and YAML::Syck are capable of deserialising code. As
this requires a string eval, which might be a security risk, you can
use this option to enable or disable the deserialisation of code via
CPAN::DeferedCode. (Note: This does not work under perl 5.6)
Do you want to enable code deserialisation (yes/no)?
yaml_module
At the time of this writing there are two competing YAML modules,
YAML.pm and YAML::Syck. The latter is faster but needs a C compiler
installed on your system. There may be more alternative YAML con-
forming modules but at the time of writing a potential third player,
YAML::Tiny, seemed not powerful enough to work with CPAN.pm.
Which YAML implementation would you prefer?
LICENSE
This program is free software; you can redistribute it and/or modify
it under the same terms as Perl itself.
perl v5.8.8 2009-02-28 CPAN::FirstTime(3)
